Multi Channel Digital Programmable Potentiometer

The device provides the ability to control electronic digital mode the outputs (control light)
analysis in scale from 0 to 255 steps ..
It has the possibility of up to 10 output channels (C :1-C: 10) independently programmed, and receives 10
scene modes (P1-P10). 

Overview

The device provides the ability to control electronic digital mode the outputs (control light)
analysis in scale from 0 to 255 steps ..
It has the possibility of up to 10 output channels (C :1-C: 10) independently programmed, and receives 10
scene modes (P1-P10).

Specification

 

Mode:
1) Display:
The screen (display) is 20 characters x 4 lines (20x4) backlit LCD type.
Appear on the screen channels operating with code C :1-C: 10.

Bottom right of the screen shows the letter P and the number of adjacent 1-10 program is most appropriate
selected to display.
By entering our programming the monitor C: 1 ... C: 10 are R: 1 ... P: 10 and below the medium
appears to the channel programming C: xx (xx = 1 to 10).

2) Planning & Control Buttons:
The (1) is the key to programming mode (Progr.).
The (2) is the key to exit the programming and normal
the public key operation for simultaneous decrease or increase of the intensity on all channels
simultaneously.
 An Holding down (2) and by simultaneously pressing the (5) or the (6) increases or decreases
intensity of all costs simultaneously.
The (3) is the key for full switching on all channels (FULL ON) and within the
programming the choice of the channel C: 1 to C: 10 to programming.
The (4) is the key to full erase all channels (FULL OFF) and within the
programming, to select the number of the program P1 to P10 for storage in memory.
The (5) is the key to immediate default and activate the program and within the P1
programming upregulation (increase) the output volume of the channel C: xx (1-10) which
is selected.
The (6) is the key to kick-start the program from P1 to P10 which has become
the default button (7). Within the programming to decrease the intensity of
default output channel.
The (7) of the default button Pxx (1-10) before the activation of the (6).

3) Serial Communication & Programming:
By using the RS232 interface, you have the choice:
A. By using our specialized keypad (12 buttons) direct activation
programs (P1-P10) and the selection Full-ON or Full-OFF.
B. Connect via Gate-Way's communication protocols with DMX-512 or I-bus EI? /? NX.
C. Using H / PC (Windows XP) and our program (Freeware) for this application.
Note: For reasons of functionality when using the RS232 port of the main keyboard
please disable and Reset via the side switch ON / OFF.

Documentation

Documents

Multi Channel Potentiometer